£15.21 – £1,258.50 p/m²
Max. Length – 3 Metres
Max. Width – 1 Metre
The Acetal POM-C Extruded Sheet is a high strength, temperature resistant, highly crystalline thermoplastic with a high melting point. It has a low coefficient of friction, good abrasion resistance and dimensional stability which makes it suitable for machining as per nylons, having much lower moisture absorption. Ideally suited for electrical insulators requiring exceptional structural strength at high temperatures (100°C long term/ 140°C short term) or moisture conditions and for machining mechanical parts.
Made to your specification in black or natural (thicknesses from 2-100 mm).
We offer a cut-to-size service so please allow 2-3 days for cutting.
Please call 01258 456798 or email email@example.com if you have any queries before placing your order.
Please call us for sizes over 1500 mm as additional postage might apply.
Density (g/cm³) – 1.41
Water Absorption (%) – 0.2
Flammability 3mm – HB
Flammability 6mm – HB
Elongation at break (%) – 34
Tensile Modulus of Elasticity (Mpa) – 2800
Ball Indentation Hardness (Mpa) – 150
Shore Hardness (Scale D) – 81
Melting Temperature (°C) – 165
Coefficient of Linear Expansion (10⁻⁶K⁻¹) – 110
Service Temperature, Long Term Minimum (°C) – (-50)
Service Temperature, Long Term Maximum (°C) – 100
Service Temperature, Short Term Maximum (°C) – 140
Heat Deflection Temperature (°C) – 110
Dielectric Constant – 3.8
Surface Resistivity (Ω) – 10¹³
Comparative Tracking Index – 600
Dielectric Strength (kV/mm) – 40